Oxva Xlim Pro 3 Pod Kit 30W 1500mAh
The Xlim Pro 3 sits at the top of OXVA's Xlim range and is the version to choose if you want the platform's flexibility without carrying a box mod. It runs up to 30W from a built-in 1500mAh battery, charges over USB-C at 5V/2A — roughly 80% in half an hour — and adds a 1.05-inch colour screen, side airflow control, and both auto-draw and button firing.
What justifies the step up from a plain Xlim is the combination of adjustable airflow and genuine wattage control in a device measuring 119.9 x 25.7 x 15mm. The side slider lets you close the draw right down for a tight mouth-to-lung inhale on a 1.2ohm pod with 50mg salt, or open it out for a restricted direct-lung hit on a lower-resistance pod, and the screen means you can see and set the wattage instead of guessing what the device has decided for you. Battery is the other honest reason to pick it: 1500mAh is around half again what most compact pods carry, and that is the difference between charging at lunchtime and charging overnight. It takes the whole Xlim and EZ pod family, which is a real advantage, since those cartridges are widely stocked and cheap to replace, and it handles both 50/50 freebase liquid and nicotine salts. Having auto-draw alongside a fire button is more useful than it sounds — the draw sensor is the component most likely to become unreliable over time, and the button is a working fallback rather than a redundancy. If you are coming off disposables, this is a device that will do the same job for months rather than days, with the caveat that refilling it and rotating pods is now your responsibility.
Specifications
- Maximum output: 30W
- Battery: 1500mAh built-in
- Charging: USB-C 5V/2A fast charging, around 80% in 30 minutes
- Display: 1.05-inch HD colour screen
- Firing: auto-draw and button
- Airflow: side adjustable airflow control
- Pod compatibility: OXVA Xlim and EZ replacement pods
- E-liquid compatibility: 50/50 freebase and nicotine salts
- Vaping style: MTL and RDTL
- Dimensions: 119.9 x 25.7 x 15mm
- Finishes: Race Red, Black Carbon, Pro Carbon, Black Leather, Sky Blue and Purple Silk
Delivery in the UAE
Same-day delivery in Abu Dhabi and next working day across the rest of the Emirates. Sold to adults aged 18 and over only.
وصف المنتج
يقع Xlim Pro 3 على قمة سلسلة Xlim من OXVA، وهو النسخة المناسبة إن أردت مرونة هذه المنصة دون حمل جهاز box mod. يعمل بقدرة تصل إلى 30W من بطارية مدمجة سعة 1500mAh، ويشحن عبر USB-C بمعدل 5V/2A أي نحو 80% خلال نصف ساعة، ويضيف شاشة ملونة قياس 1.05 إنش وتحكماً جانبياً بالهواء وتشغيلاً بالسحب وبالزر معاً.
ما يبرر الانتقال إليه من Xlim العادي هو اجتماع التحكم بالهواء مع ضبط حقيقي للواط في جهاز بأبعاد 119.9 × 25.7 × 15 ملم. يتيح لك المنزلق الجانبي تضييق مجرى الهواء تماماً للحصول على سحبة ضيقة من الفم إلى الرئة مع بود 1.2ohm وسائل بتركيز 50mg، أو فتحه للحصول على سحب مقيّد إلى الرئة مع بود بمقاومة أقل، والشاشة تعني أنك ترى الواط وتضبطه بدل التخمين. والبطارية سبب وجيه آخر لاختياره: 1500mAh تزيد بنحو النصف عمّا تحمله معظم أجهزة البود المدمجة، وهي الفرق بين الشحن ظهراً والشحن ليلاً. يقبل الجهاز عائلة بودات Xlim وEZ بالكامل، وهي ميزة حقيقية لأن هذه الخراطيش متوفرة على نطاق واسع ورخيصة الاستبدال، ويعمل مع السوائل 50/50 من نوع freebase ومع أملاح النيكوتين. أما وجود التشغيل بالسحب إلى جانب الزر فأهم مما يبدو، لأن حساس السحب هو أكثر المكوّنات عرضة لفقدان الثبات مع الوقت، والزر هنا بديل عملي لا مجرد تكرار. وإن كنت قادماً من الأجهزة التي تُستخدم مرة واحدة، فهذا جهاز يؤدي المهمة نفسها لشهور لا لأيام، شرط أن تتحمل مسؤولية تعبئته وتبديل بوداته.
المواصفات
- أقصى قدرة: 30W
- البطارية: 1500mAh مدمجة
- الشحن: USB-C بسرعة 5V/2A، نحو 80% خلال 30 دقيقة
- الشاشة: ملونة HD قياس 1.05 إنش
- التشغيل: بالسحب وبالزر
- الهواء: تحكم جانبي قابل للضبط
- توافق البودات: بودات OXVA Xlim وEZ
- توافق السوائل: 50/50 freebase وأملاح النيكوتين
- أسلوب السحب: MTL وRDTL
- الأبعاد: 119.9 × 25.7 × 15 ملم
- الألوان: Race Red، Black Carbon، Pro Carbon، Black Leather، Sky Blue، Purple Silk
التوصيل داخل الإمارات
توصيل في نفس اليوم داخل أبوظبي، وخلال يوم عمل واحد إلى باقي الإمارات. البيع للبالغين 18 عاماً فما فوق فقط.