SMOK & OFRF NexMesh Pod System Kit 1200mAh

  • Dhs. 120.00
Tax included. Shipping calculated at checkout.


The NexMesh Pod System is a collaboration between SMOK and OFRF, and it sits between a simple pod and a full mod. There is a 1200mAh internal battery with variable wattage from 5W to 30W, a 0.69 inch screen showing the vaping data, and refillable 2ml cartridges in an aluminium alloy body. It is built primarily as a mouth-to-lung device but will handle light direct-lung vaping at the upper end of its range.

The two coils in the box explain how it is meant to be used. Both read 0.4ohm, but the Kanthal A1 mesh coil is at its best between 13W and 18W and the SS316L regular coil between 15W and 20W, which means the 30W ceiling is headroom rather than a working setting. Mesh heats more evenly across the wick and gives the fuller flavour; the regular coil is the more restrained option and tends to last longer. The cartridge fills from the side, which is considerably less messy than prising a bottom bung out over a sink, and the base is sealed against condensation working back into the body, a common failure point on pod kits of this size. Wattage control is the reason to buy this over a fixed-output pod: run a strong salt nicotine liquid at the bottom of the range and a lower-strength freebase higher up.

Specifications

  • Brand: SMOK and OFRF
  • Battery: 1200mAh built-in
  • Output: 5W-30W
  • Display: 0.69 inch screen
  • Pod capacity: 2ml
  • Coils supplied: 0.4ohm Kanthal A1 mesh (best 13-18W) and 0.4ohm SS316L regular (best 15-20W)
  • Resistance range: 0.4ohm-3ohm
  • Dimensions: 80.5 x 45.0 x 17.5mm
  • Charging: 5V, maximum 1.2A
  • Filling: side fill
  • Draw style: MTL and light DTL

Colours

Available in 5 colours: Red, Gun Metal, Silver, Blue and Black.

In the box: the device, one 0.4ohm A1 mesh coil, one 0.4ohm SS316L regular coil, a charging cable and a user manual.

Delivery in the UAE

Same-day delivery in Abu Dhabi and next working day across the rest of the Emirates. Sold to adults aged 18 and over only.


وصف المنتج

جهاز NexMesh Pod System هو ثمرة تعاون بين SMOK وOFRF، ويقع في منتصف الطريق بين جهاز البود البسيط والمود الكامل. فهو يضم بطارية داخلية بسعة 1200 mAh مع قدرة متغيرة من 5 إلى 30 وات، وشاشة مقاس 0.69 بوصة تعرض بيانات الاستخدام، وخراطيش قابلة لإعادة التعبئة بسعة 2 مل ضمن هيكل من سبيكة الألمنيوم. وقد صُمم أساساً للسحب من الفم إلى الرئة لكنه يتحمل سحباً مباشراً خفيفاً عند أعلى نطاقه.

والملفان المرفقان يوضحان طريقة استخدامه المقصودة. فكلاهما بمقاومة 0.4 أوم، لكن ملف Kanthal A1 من نوع mesh يعمل في أفضل حالاته بين 13 و18 وات، وملف SS316L العادي بين 15 و20 وات، ما يعني أن سقف 30 وات هو هامش إضافي لا إعداد تشغيل يومي. ويسخن ملف الـ mesh بشكل أكثر انتظاماً على القطن ويمنح نكهة أغنى، بينما يعد الملف العادي الخيار الأهدأ والأطول عمراً. ويُعبأ الخرطوش من الجانب، وهو أقل فوضى بكثير من نزع سدادة سفلية، كما أن قاعدته معزولة ضد تسرب التكاثف إلى داخل الجهاز، وهي نقطة ضعف معروفة في أجهزة البود من هذا الحجم. ويبقى التحكم في القدرة هو السبب لاختياره على جهاز بود ثابت الخرج: شغّل سوائل ملح النيكوتين القوية عند أدنى النطاق، والنيكوتين الحر منخفض التركيز أعلى منه.

المواصفات

  • العلامة التجارية: SMOK وOFRF
  • البطارية: 1200 mAh مدمجة
  • القدرة: 5-30 وات
  • الشاشة: 0.69 بوصة
  • سعة الخرطوش: 2 مل
  • الملفات المرفقة: 0.4 أوم Kanthal A1 mesh (الأفضل 13-18 وات) و0.4 أوم SS316L عادي (الأفضل 15-20 وات)
  • نطاق المقاومة: 0.4-3 أوم
  • الأبعاد: 80.5 × 45.0 × 17.5 ملم
  • الشحن: 5 فولت، بحد أقصى 1.2 أمبير
  • التعبئة: من الجانب
  • نمط السحب: من الفم إلى الرئة وسحب مباشر خفيف

محتويات العلبة: الجهاز، وملف 0.4 أوم A1 mesh، وملف 0.4 أوم SS316L عادي، وكابل شحن، ودليل الاستخدام.

التوصيل داخل الإمارات

توصيل في نفس اليوم داخل أبوظبي، وخلال يوم عمل واحد إلى باقي الإمارات. البيع للبالغين 18 عاماً فما فوق فقط.

Premium Vapes UAE · Al Sa'adah, Zone 1, Abu Dhabi, United Arab Emirates · 02 491 1167

Online vape shop delivering across the United Arab Emirates. Sold to adults aged 18 and over only.