Justfog Q16 Pro Replacement Coils (5 coils)

Replacement coil heads for the JustFog Q16 Pro, supplied five to a pack. Each head screws into the base of the tank's airflow controller in the same way as a conventional clearomizer head, so replacing one means emptying the tank, unscrewing the spent head and fitting the new one before refilling.

The construction is worth understanding because it explains how the coil behaves. The head has a 2.6mm chimney and four wicking slots of roughly 1.6 x 3.6mm, and the coil itself is mounted horizontally inside rather than vertically. Those slots are small, which is what keeps the draw tight and mouth-to-lung, but it also means the head wicks slowly and does markedly better on thinner e-liquid: high-PG blends below about 50% VG feed the wick properly, while thicker high-VG juice struggles to reach the coil quickly enough and gives dry, flat hits. The same geometry is why the Q16 Pro rewards a slower, longer draw rather than short sharp puffs. Prime a new head by wetting the cotton visible through the slots and letting the filled tank stand for a few minutes before the first draw; running one dry even once is usually what ends its life early.

Specifications

• Pack size: 5 coil heads
• Chimney bore: 2.6 mm
• Wicking ports: Four, approximately 1.6 x 3.6 mm
• Coil orientation: Horizontal
• Fitting: Screws into the tank base beneath the airflow control
• Recommended e-liquid: High PG, below 50% VG
• Compatibility: JustFog Q16 Pro

Delivery in the UAE

Same-day delivery in Abu Dhabi and next working day across the rest of the Emirates. Sold to adults aged 18 and over only.